خصائص المنتج
Features
- Outstanding Polishability
 - High Gloss Retention Over Time
 - Wide Shade Matching Range (Chameleon Effect)
 - High Wear Resistance
 - Minimal Wear to Opposing Teeth
 - Low Shrinkage
 - Good Radiopacity
 - RAP Technology for Shortened Curing Time
 - Versatile Indications: Suitable for anterior and posterior restorations, veneers, diastema closure, and repair of porcelain/composite.
 - Advanced Filler Composition: 82% silica-zirconia filler, reducing polymerization shrinkag
 
Description
Palfique LX5 Syringe Refill is an advanced light-cured composite resin designed for anterior and posterior restorations, suitable for all carious classes. Comprising 82% by weight (71% by volume) of silica-zirconia filler and composite filler, it exhibits decreased polymerization shrinkage due to its high filler load. The inorganic filler, featuring spherical submicron particles (mean size: 0.2μm), ensures exceptional gloss retention and wear resistance. The monomer matrix contains Bis-GMA and Triethylene glycol dimethacrylate. Incorporating Radical-Amplified Photo polymerization initiator technology (RAP technology), PALFIQUE LX5 offers a one-third reduction in curing time compared to conventional resin composites, facilitated by a light curing unit with a wavelength range of 400 to 500nm.
Indications:
- Direct anterior and posterior restorations, including occlusal surfaces, covering all carious classes.
 - Direct bonded composite veneer.
 - Diastema closure.
 - Repair of porcelain/composite.
 
Key Specifications
- Quick Curing Time: 10 sec. with halogen light (≥400mW/cm2)
 - Extended Working Time: 90 sec. under ambient light (10,000 lx)
 - Available in many shades
 - Extended working time
 - Outstanding polishability
 
Packaging
- 1 x Palfique LX5 Syringe Refill (3.8g)
 
Direction to Use
Isolation:
- Isolate the treatment area using a rubber dam or other suitable isolation methods to prevent contamination.
 
Tooth Preparation:
- Prepare the tooth according to standard restorative procedures, removing any decay or damaged structure.
 
Etching and Bonding:
- Etch the tooth surface with an appropriate etchant, rinse, and apply a bonding agent as per the manufacturer's instructions.
 
Application of PALFIQUE LX5:
- Dispense the PALFIQUE LX5 from the syringe onto a mixing pad. Use an appropriate instrument for placement and shaping.
 
Light-Curing:
- Light-cure PALFIQUE LX5 using a suitable light-curing unit. Follow the recommended curing time and ensure adequate coverage of all applied material.
 
Finishing and Polishing:
- Once cured, finish and polish the restoration using fine finishing burs and polishing discs to achieve the desired aesthetics.
 
Check Occlusion:
- Verify occlusion to ensure proper bite and adjust if necessary.
 
Clean Instruments:
- Clean placement instruments with alcohol after use.
 
Patient Instructions:
- Advise the patient to avoid chewing on hard objects immediately after the procedure.
 
Safety Precautions:
- Adhere to safety precautions, including the use of protective eyewear when using a light-curing unit.
 
Additional Info
- Country Of Origin: Japan
 - Manufacturer: Tokuyama
 
Warranty
- Warranty is not applicable for this product.
 







